Yealink UAD Config Sample - Fireline Communications Support

UAD Templates allow you to add additional configuration to a single extensions telephone, a group of telephone extension or all extensions. UAD programming can be done in two sections on the system.

Settings > UAD > User Agent General Auto Provisioning Template:
1. Allpows you to program all phone extensions assigned to the UAD
Home > Extensions > Select Extension > Advanced Options > UAD Auto Provisioning Template
1. Allows you to program a single telephone extension.

##### Set admin Password #####

security.user_password = admin:c@ompl3xpassWord

##### Transfer direectly to Voicemail #####

phone_setting.custom_softkey_enable = 1
edk.edklist.1.action = *400*$P1N10$
edk.edklist.1.enable = 1
edk.edklist.1.mname = Intercom
edk.edklist.2.action = $KSoftKey1$*125$PEnter Ext&C10&N&M$$Trefer$
edk.edklist.2.enable = 1
edk.edklist.2.mname = VoicemailTx
edk.edkprompt.1.enable = 1
edk.edkprompt.1.label = Enter Ext
edk.edkprompt.1.type = numeric
edk.edkprompt.1.userfeedback = visible

##### Set Static IP address on telephone #####

 network.internet_port.type = 2
 network.internet_port.ip = 192.168.1.10
 network.internet_port.mask = 255.255.255.0
 network.internet_port.gateway = 192.168.1.1
 network.static_dns_enable = 1
 network.primary_dns = 8.8.8.8

##### Auto Provisioning #####

auto_provision.server.username = HTTP username 
auto_provision.server.password = HTTP password 
auto_provision.server.url = ux.firelinecommunications.com

##### Ringtones #####

distinctive_ring_tones.alert_info.1.ringer = 2 
distinctive_ring_tones.alert_info.1.text = RING 1 
distinctive_ring_tones.alert_info.10.ringer = 10 
distinctive_ring_tones.alert_info.10.text = RING 10

##### Forward features #####

forward.always.enable = 0 
forward.always.off_code = *72 
forward.always.on_code = *71 
forward.busy.enable = 0 
forward.no_answer.enable = 0

For more information regarding auto provisioning see our Yealink – User Docs